Contact Us: 0 232 799 03 33
Rubber Ring Joint
Ensure that the spigot and socket are free from dust, grit, grease and as dry as possible. Insert pipeinto the socket without seal ring in place and mark pipe when it is fully inserted. Place seal in groove of socket ensuring that seal is correct way round. Anger seal rings should be fitted
with tapered section facing the outside of the socket.
Apply jointing lubricant to the chamfer and the end of the spigot of the pipe or fitting only. Push the pipe firmly into the socket up to the insertion mark previously made. If an expansion gap is required the pipe is then pulled back by the desired amount.
Our company has moved to plastic injection moulding industry in 2003.
In 2005, with a radical decision, with the support of our parent company
GEMAŞ GENEL MÜHENDİSLİK AS, we started to produce UPVC Pipe Fittings and Valves.
İTOB Organize San. Bölgesi 10001 Sokak No:28 Tekeli Menderes – İZMİR
1443 Sokak No: 2 / S Tesisat İş Merkezi
Yenişehir – İZMİR
+90 232 799 03 33 ( Pbx )
+90 232 799 02 67 ( Fax )
+90 232 449 19 26 ( Pbx )
+90 232 449 19 28 ( Fax )
© Copyright 2019 Star Deri Teks. Havuz ve Bilişim Ürünleri San .Tic. A.Ş. All rights reserved.